Showing all 16 results
-
FSI B21
FSI 21 - 8 stk87 cmMaks 2,4 cm30 cm25 cm11-14 hkPetrolNo68 cm125 kg- Hill hold system (Pat. pending) – unique system developed by FSI to increase safety and give full control when moving on ramps, up steps or in terrain.
- Closed bearing housing – no daily maintenance is required as the cutter wheel bearing is pre-greased from factory for more than 1000 hours of normal operation.
- Turntable design – a well-balanced pivot point and two individual wheel brakes makes cutting easy on the operator
- Improve ergonomics – position the vibration reduced operator handle as you prefer with many adjustment options
- Safety bar – disengaging the cutter wheel upon release
- V-belt drive for optimal power transmission
- Easily accessible lashing and lifting points
- Centrifugal clutch
- Manual brake for each wheel
- Large and easy-to-operate wheels
- Tool set
-
FSI B22
FSI 21 - 8 pcs90 cmMax 2.4 cm per sweep30 cm25 cm14 HPPetrolNo68 cm210 kg- Large wheels with individual oil motors (2WD)
- Vibration reduced and height-adjustable handlebar
- Safety bar, disengaging the cutter wheel upon release
- Manual sweep across pivot joint
- Manual brake for each wheel
- Bypass valve to disengage drive for freewheeling
- Electromagnetic clutch
- V-belt drive for optimal power transmission
- Braking of cutter disc on disengaging
- Electrical start of engine
- Easily accessible lashing & lifting points
- Tool set
-
FSI B28
FSI 21 - 8 pcs.135 cmMax. 4.8 cm per sweep80 cm38 cm26.5 hpGasolineNo80 cm665 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Safety bar, disengaging the cutter wheel upon release
- Fast braking of cutter disc on disengaging
- Hydraulic 2WD
- Mechanical differential lock for better mobility and increased traction
- 90 degrees swing-out control panel, provides excellent visibility of the cutting area
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: Twin wheels with centre bolt for easy fitting/removing
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI B31-749
FSI 25 - 8 pcs120 cm Max 3.6 cm per sweep68 cm 40 cm26.5 HPPetrolNo74 cm650 kg- No daily maintenance and elimination of V-belts lower operating costs and workshop time.
- Enhanced manoeuvrability and stability with counter-rotating tracks and a low centre of gravity.
- Complete control of operation from the swing-out operator’s panel.
- Safety bar, disengaging the cutter wheel upon release to increase safety of the operator.
- Easily accessible lashing and lifting points for fast and secure transportation.
-
FSI B31-980
FSI 25 - 8 pcs120 cm Max 3.6 cm per sweep68 cm 40 cm38 HPPetrolNo74 cm680 kg- Compact design, only 74 cm wide – ideal for tight spaces.
- Intuitive controls, easy access to all essential features
- Powerful 38 HP Kohler engine
- The hydraulic-driven cutter wheel eliminates the need for daily maintenance
- Counter-rotating tracks and a low center of gravity ensure great maneuverability and stability.
-
FSI B38
FSI 25 - 12 pcs170 cmMax 5.7 cm per sweep85 cm44 cm38 HPPetrolNo79 - 127 cm840 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI B38 4WD
FSI 25 - 12 pcs170 cmMax 5.7 cm per sweep85 cm44 cm38 HPPetrolNo79 - 127 cm900 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI B38 4WD REMOTE
FSI 25 - 12 pcs170 cmMax 5.7 cm per sweep85 cm44 cm38 HPPetrolYes, Scanreco79 - 127 cm900 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI B38 TRACK
FSI 25 - 12 pcs170 cmMax 5.7 cm per sweep85 cm44 cm38 HPPetrolYes, Scanreco78 - 115 cm1100 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI D30
FSI 25 - 8 pcs135 cmMax 5.2 cm per sweep80 cm38 cm25 HPDieselNo80 - 135 cm810 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Fast braking of cutter disc on disengaging
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI D30 TRACK
FSI 25 - 8 pcs135 cmMax 5.2 cm per sweep80 cm38 cm25 HPDieselNo80 - 115 cm970 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Fast braking of cutter disc on disengaging
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI D30 TRACK REMOTE
FSI 25 - 8 pcs135 cmMax 5.2 cm per sweep80 cm38 cm25 HPDieselYes, Scanreco80 - 115 cm970 kg- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Fast braking of cutter disc on disengaging
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI D60
FSI 25 - 16 pcs170 cmMax 6.8 cm per sweep854460 HPDieselYes, Scanreco80 - 123 cm1250 kg- Fast braking of cutter disc on disengaging
- Gear and V-belt drive for optimal power transmission
- Hydraulically controlled mechanical clutch
- Maintenance-free bearing housing at cutting head
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Scanreco radio control with extra battery, battery charger and cable
- Lockable storage space for radio remote control
- LED work light
- Flex chip guard for optimal chip collection
- Lockable access to fuel- and hydraulic filling points
- Easily accessible lashing & lifting points
- Tool set
-
FSI D60 TRACK
FSI 25 - 16 pcs170 cmMax 6.8 cm per sweep85 cm44 cm60 HPDieselYes, Scanreco80 - 115 cm1450 kg- Fast braking of cutter disc on disengaging
- Gear and V-belt drive for optimal power transmission
- Hydraulically controlled mechanical clutch
- Maintenance-free bearing housing at cutting head
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Scanreco radio control with extra battery, battery charger and cable
- Lockable storage space for radio remote control
- LED work light
- Flex chip guard for optimal chip collection
- Lockable access to fuel- and hydraulic filling points
- Easily accessible lashing & lifting points
- Tool set
-
FSI D74
FSI 29 - 28 pcs200 cmMax 12.3 cm per sweep60 cm38 - 52 cm74 HPDieselYes, Scanreco89 - 152 cm1725 kg- T-Gear and double-sided V-belt drive for optimal power transmission
- Fast braking of cutter disc on disengaging
- Electrical controlled mechanical clutch with brake
- FSI power-sweep – intelligent sweep controller for top performance
- Scanreco radio control with extra battery, battery charger and cable
- 12V outlet for charging of remote controller battery
- Heavy-duty chip guard
- LED work light
- Easily accessible lashing & lifting points
- Tool set
-
FSI D74 TRACK
FSI 29 - 28 pcs200 cmMax 12.3 cm per sweep60 cm38 - 52 cm74 HPDieselYes 89 - 140 cm1950 kg- T-Gear and double-sided V-belt drive for optimal power transmission
- Fast braking of cutter disc on disengaging
- Electrical controlled mechanical clutch with brake
- FSI power-sweep – intelligent sweep controller for top performance
- Scanreco radio control with extra battery, battery charger and cable
- 12V outlet for charging of remote controller battery
- Heavy-duty chip guard
- LED work light
- Easily accessible lashing & lifting points
- Tool set
FSI 21 - 8 stk
87 cm
Maks 2,4 cm
30 cm
25 cm
11-14 hk
Petrol
No
68 cm
125 kg
