loader
Baumstumpffräsen mit eigenem

Motor

  /    /  Motor

Showing all 14 results

  • FSI B21

    Lern mehr
    FSI 21 - 8 stk87 cmMaks 2,4 cm30 cm25 cm
    11-14 hkBenzinNej68 cm125 kg
    • Hill hold system (Pat. pending) – unique system developed by FSI to increase safety and give full control when moving on ramps, up steps or in terrain.
    • Closed bearing housing – no daily maintenance is required as the cutter wheel bearing is pre-greased from factory for more than 1000 hours of normal operation.
    • Turntable design – a well-balanced pivot point and two individual wheel brakes makes cutting easy on the operator
    • Improve ergonomics – position the vibration reduced operator handle as you prefer with many adjustment options
    • Safety bar – disengaging the cutter wheel upon release
    • V-belt drive for optimal power transmission
    • Easily accessible lashing and lifting points
    • Centrifugal clutch
    • Manual brake for each wheel
    • Large and easy-to-operate wheels
    • Tool set
  • FSI B22

    Lern mehr
    FSI 21 - 8 Stck90 cmMax 2,4 cm je Schwenk30 cm25 cm
    14 PSBenzinNein68 cm210 kg
    • Large wheels with individual oil motors (2WD)
    • Vibration reduced and height-adjustable handlebar
    • Safety bar, disengaging the cutter wheel upon release
    • Manual sweep across pivot joint
    • Manual brake for each wheel
    • Bypass valve to disengage drive for freewheeling
    • Electromagnetic clutch
    • V-belt drive for optimal power transmission
    • Braking of cutter disc on disengaging
    • Electrical start of engine
    • Easily accessible lashing & lifting points
    • Tool set
  • FSI B28

    Lern mehr
    FSI 21 - 8 Stck135 cmMax 4,8 cm je Schwenk80 cm38 cm
    26,5 PSBenzinNein80 cm665 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • Safety bar, disengaging the cutter wheel upon release
    • Fast braking of cutter disc on disengaging
    • Hydraulic 2WD
    • Mechanical differential lock for better mobility and increased traction
    • 90 degrees swivel control panel, provides excellent visibility of the cutting area
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
    • OPTION: Twin wheels with centre bolt for easy fitting/removing
    • OPTION: FSI power-sweep – intelligent sweep controller for top performance
  • FSI B38

    Lern mehr
    FSI 25 - 12 Stck170 cmMax 5,7 cm je Schwenk85 cm44 cm
    38 PSBenzinNein79 - 127 cm840 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • FSI power-sweep – intelligent sweep controller for top performance
    • FSI power-cut – optimised cutting disc
    • Maintenance-free bearing housing at cutting head
    • Fast braking of cutter disc on disengaging
    • Flex chip guard for optimal chip collection
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
  • FSI B38 4WD

    Lern mehr
    FSI 25 - 12 Stck170 cmMax 5,7 cm je Schwenk85 cm44 cm
    38 PSBenzinNein79 - 127 cm900 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • FSI power-sweep – intelligent sweep controller for top performance
    • FSI power-cut – optimised cutting disc
    • Maintenance-free bearing housing at cutting head
    • Fast braking of cutter disc on disengaging
    • Flex chip guard for optimal chip collection
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
  • FSI B38 4WD REMOTE

    Lern mehr
    FSI 25 - 12 Stck170 cmMax 5,7 cm je Schwenk85 cm44 cm
    38 PSBenzinJa, Scanreco79 - 127 cm900 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • FSI power-sweep – intelligent sweep controller for top performance
    • FSI power-cut – optimised cutting disc
    • Maintenance-free bearing housing at cutting head
    • Fast braking of cutter disc on disengaging
    • Flex chip guard for optimal chip collection
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
  • FSI B38 TRACK

    Lern mehr
    FSI 25 - 12 Stck170 cmMax 5,7 cm je Schwenk85 cm44 cm
    38 PSBenzinJa, Scanreco78 - 115 cm1100 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • FSI power-sweep – intelligent sweep controller for top performance
    • FSI power-cut – optimised cutting disc
    • Maintenance-free bearing housing at cutting head
    • Fast braking of cutter disc on disengaging
    • Flex chip guard for optimal chip collection
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
  • FSI D30

    Lern mehr
    FSI 25 - 8 Stck135 cmMax 5,2 cm je Schwenk80 cm38 cm
    25 PSDieselNein80 - 135 cm810 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • Fast braking of cutter disc on disengaging
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
    • OPTION: FSI power-sweep – intelligent sweep controller for top performance
  • FSI D30 TRACK

    Lern mehr
    FSI 25 - 8 Stck135 cmMax 5,2 cm je Schwenk80 cm38 cm
    25 PSDieselNein80 - 115 cm970 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • Fast braking of cutter disc on disengaging
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
    • OPTION: FSI power-sweep – intelligent sweep controller for top performance
  • FSI D30 TRACK REMOTE

    Lern mehr
    FSI 25 - 8 Stck135 cmMax 5,2 cm je Schwenk80 cm38 cm
    25 PSDieselJa, Scanreco80 - 115 cm970 kg
    • V-belt drive for optimal power transmission
    • FSI power-clutch – powerful hydraulic clutch with active brake
    • Fast braking of cutter disc on disengaging
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
    • Integrated toolbox
    • OPTION: FSI power-sweep – intelligent sweep controller for top performance
  • FSI D60

    Lern mehr
    FSI 25 - 16 Stck170 cmMax 6,8 cm je Schwenk85 cm44 cm
    60 PSDieselJa, Scanreco80 - 123 cm1250 kg
    • Fast braking of cutter disc on disengaging
    • Gear and V-belt drive for optimal power transmission
    • Hydraulically controlled mechanical clutch
    • Maintenance-free bearing housing at cutting head
    • FSI power-sweep – intelligent sweep controller for top performance
    • FSI power-cut – optimised cutting disc
    • Scanreco radio control with extra battery, battery charger and cable
    • Lockable storage space for radio remote control
    • LED work light
    • Flex chip guard for optimal chip collection
    • Lockable access to fuel- and hydraulic filling points
    • Easily accessible lashing & lifting points
    • Tool set
  • FSI D60 TRACK

    Lern mehr
    FSI 25 - 16 Stck170 cmMax 6,8 cm je Schwenk85 cm44 cm
    60 PSDieselJa, Scanreco80 - 115 cm1450 kg
    • Fast braking of cutter disc on disengaging
    • Gear and V-belt drive for optimal power transmission
    • Hydraulically controlled mechanical clutch
    • Maintenance-free bearing housing at cutting head
    • FSI power-sweep – intelligent sweep controller for top performance
    • FSI power-cut – optimised cutting disc
    • Scanreco radio control with extra battery, battery charger and cable
    • Lockable storage space for radio remote control
    • LED work light
    • Flex chip guard for optimal chip collection
    • Lockable access to fuel- and hydraulic filling points
    • Easily accessible lashing & lifting points
    • Tool set
  • FSI D74

    Lern mehr
    FSI 29 - 28 Stck200 cmMax 12,3 cm je Schwenk60 cm38 - 52 cm
    74 PSDieselJa, Scanreco89 - 152 cm1725 kg
    • T-Gear and double-sided V-belt drive for optimal power transmission
    • Fast braking of cutter disc on disengaging
    • Electrical controlled mechanical clutch with brake
    • FSI power-sweep – intelligent sweep controller for top performance
    • Scanreco radio control with extra battery, battery charger and cable
    • 12V outlet for charging of remote controller battery
    • Heavy-duty chip guard
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set
  • FSI D74 TRACK

    Lern mehr
    FSI 29 - 28 Stck200 cmMax 12,3 cm je Schwenk60 cm38 - 52 cm
    74 PSDieselJa, Scanreco89 - 140 cm1950 kg
    • T-Gear and double-sided V-belt drive for optimal power transmission
    • Fast braking of cutter disc on disengaging
    • Electrical controlled mechanical clutch with brake
    • FSI power-sweep – intelligent sweep controller for top performance
    • Scanreco radio control with extra battery, battery charger and cable
    • 12V outlet for charging of remote controller battery
    • Heavy-duty chip guard
    • LED work light
    • Easily accessible lashing & lifting points
    • Tool set