Showing 20 products
-
FSI B21
FSI 21 - 8 stk
87 cm
Maks 2,4 cm
30 cm
25 cm
11-14 hk
Petrol
No
68 cm
125 kg
- Hill hold system (Pat. pending) – unique system developed by FSI to increase safety and give full control when moving on ramps, up steps or in terrain.
- Closed bearing housing – no daily maintenance is required as the cutter wheel bearing is pre-greased from factory for more than 1000 hours of normal operation.
- Turntable design – a well-balanced pivot point and two individual wheel brakes makes cutting easy on the operator
- Improve ergonomics – position the vibration reduced operator handle as you prefer with many adjustment options
- Safety bar – disengaging the cutter wheel upon release
- V-belt drive for optimal power transmission
- Easily accessible lashing and lifting points
- Centrifugal clutch
- Manual brake for each wheel
- Large and easy-to-operate wheels
- Tool set
-
FSI B22
FSI 21 - 8 pcs
90 cm
Max 2.4 cm per sweep
30 cm
25 cm
14 HP
Petrol
No
68 cm
210 kg
- Large wheels with individual oil motors (2WD)
- Vibration reduced and height-adjustable handlebar
- Safety bar, disengaging the cutter wheel upon release
- Manual sweep across pivot joint
- Manual brake for each wheel
- Bypass valve to disengage drive for freewheeling
- Electromagnetic clutch
- V-belt drive for optimal power transmission
- Braking of cutter disc on disengaging
- Electrical start of engine
- Easily accessible lashing & lifting points
- Tool set
-
FSI B28
FSI 21 - 8 pcs
135 cm
Max 4.8 cm per sweep
80 cm
38 cm
26.5 HP
Petrol
No
80 cm
665 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Safety bar, disengaging the cutter wheel upon release
- Fast braking of cutter disc on disengaging
- Hydraulic 2WD
- Mechanical differential lock for better mobility and increased traction
- 90 degrees swivel control panel, provides excellent visibility of the cutting area
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: Twin wheels with centre bolt for easy fitting/removing
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI B31
FSI 25 - 8 pcs
120 cm
Max 3.6 cm per sweep
68 cm
40 cm
26.5 HP
Petrol
No
74 cm
650 kg
- No daily maintenance and elimination of V-belts lower operating costs and workshop time.
- Enhanced manoeuvrability and stability with counter-rotating tracks and a low centre of gravity.
- Complete control of operation from the swing-out operator’s panel.
- Safety bar, disengaging the cutter wheel upon release to increase safety of the operator.
- Easily accessible lashing and lifting points for fast and secure transportation.
-
FSI B38
FSI 25 - 12 pcs
170 cm
Max 5.7 cm per sweep
85 cm
44 cm
38 HP
Petrol
No
79 - 127 cm
840 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI B38 4WD
FSI 25 - 12 pcs
170 cm
Max 5.7 cm per sweep
85 cm
44 cm
38 HP
Petrol
No
79 - 127 cm
900 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI B38 4WD REMOTE
FSI 25 - 12 pcs
170 cm
Max 5.7 cm per sweep
85 cm
44 cm
38 HP
Petrol
Yes, Scanreco
79 - 127 cm
900 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI B38 TRACK
FSI 25 - 12 pcs
170 cm
Max 5.7 cm per sweep
85 cm
44 cm
38 HP
Petrol
Yes, Scanreco
78 - 115 cm
1100 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Maintenance-free bearing housing at cutting head
- Fast braking of cutter disc on disengaging
- Flex chip guard for optimal chip collection
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
-
FSI D30
FSI 25 - 8 pcs
135 cm
Max 5.2 cm per sweep
80 cm
38 cm
25 HP
Diesel
No
80 - 135 cm
810 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Fast braking of cutter disc on disengaging
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI D30 TRACK
FSI 25 - 8 pcs
135 cm
Max 5.2 cm per sweep
80 cm
38 cm
25 HP
Diesel
No
80 - 115 cm
970 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Fast braking of cutter disc on disengaging
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI D30 TRACK REMOTE
FSI 25 - 8 pcs
135 cm
Max 5.2 cm per sweep
80 cm
38 cm
25 HP
Diesel
Yes, Scanreco
80 - 115 cm
970 kg
- V-belt drive for optimal power transmission
- FSI power-clutch – powerful hydraulic clutch with active brake
- Fast braking of cutter disc on disengaging
- LED work light
- Easily accessible lashing & lifting points
- Tool set
- Integrated toolbox
- OPTION: FSI power-sweep – intelligent sweep controller for top performance
-
FSI D60
FSI 25 - 16 pcs
170 cm
Max 6.8 cm per sweep
85
44
60 HP
Diesel
Yes, Scanreco
80 - 123 cm
1250 kg
- Fast braking of cutter disc on disengaging
- Gear and V-belt drive for optimal power transmission
- Hydraulically controlled mechanical clutch
- Maintenance-free bearing housing at cutting head
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Scanreco radio control with extra battery, battery charger and cable
- Lockable storage space for radio remote control
- LED work light
- Flex chip guard for optimal chip collection
- Lockable access to fuel- and hydraulic filling points
- Easily accessible lashing & lifting points
- Tool set
-
FSI D60 TRACK
FSI 25 - 16 pcs
170 cm
Max 6.8 cm per sweep
85 cm
44 cm
60 HP
Diesel
Yes, Scanreco
80 - 115 cm
1450 kg
- Fast braking of cutter disc on disengaging
- Gear and V-belt drive for optimal power transmission
- Hydraulically controlled mechanical clutch
- Maintenance-free bearing housing at cutting head
- FSI power-sweep – intelligent sweep controller for top performance
- FSI power-cut – optimised cutting disc
- Scanreco radio control with extra battery, battery charger and cable
- Lockable storage space for radio remote control
- LED work light
- Flex chip guard for optimal chip collection
- Lockable access to fuel- and hydraulic filling points
- Easily accessible lashing & lifting points
- Tool set
-
FSI D74
FSI 29 - 28 pcs
200 cm
Max 12.3 cm per sweep
60 cm
38 - 52 cm
74 HP
Diesel
Yes, Scanreco
89 - 152 cm
1725 kg
- T-Gear and double-sided V-belt drive for optimal power transmission
- Fast braking of cutter disc on disengaging
- Electrical controlled mechanical clutch with brake
- FSI power-sweep – intelligent sweep controller for top performance
- Scanreco radio control with extra battery, battery charger and cable
- 12V outlet for charging of remote controller battery
- Heavy-duty chip guard
- LED work light
- Easily accessible lashing & lifting points
- Tool set
-
FSI D74 TRACK
FSI 29 - 28 pcs
200 cm
Max 12.3 cm per sweep
60 cm
38 - 52 cm
74 HP
Diesel
Yes, Scanreco
89 - 140 cm
1950 kg
- T-Gear and double-sided V-belt drive for optimal power transmission
- Fast braking of cutter disc on disengaging
- Electrical controlled mechanical clutch with brake
- FSI power-sweep – intelligent sweep controller for top performance
- Scanreco radio control with extra battery, battery charger and cable
- 12V outlet for charging of remote controller battery
- Heavy-duty chip guard
- LED work light
- Easily accessible lashing & lifting points
- Tool set
-
FSI H20
FSI 21 - 12 pcs
Max 2.5 cm per sweep
70 kg
2.0 - 3.5 ton
12-22 kW / 15-30 HP
30-50 l/min @ max 250 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil). -
FSI H20S
FSI 21 - 12 pcs
70 cm
Max 2.5 cm per sweep
92 kg
1.5 - 2.5 ton
12-22 kW / 15-30 HP
30-50 l/min @ max 250 bar
Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
request.
Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
FSI HxxS stump cutters require a free-flow return to the tank (leak oil). -
FSI H40
FSI 25 - 16 pcs
Max 5.2 cm per sweep
150 kg
3.0 - 7.0 ton
18-31 kW / 25-42 HP
50-75 l/min @ max 250 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil). -
FSI H40S 50-75
FSI 25 - 16 pcs
110 cm
Max 5.2 cm per sweep
200 kg
???
18-31 kW / 25-42 HP
50-75 l/min @ max 250 bar
Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
request.
Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
FSI HxxS stump cutters require a free-flow return to the tank (leak oil). -
FSI H40S 80-110
FSI 25 - 16 pcs
110 cm
Max 5.2 cm per sweep
250 kg
???
29-48 kW / 40-65 HP
80-110 l/min @ max 250 bar
Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
request.
Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
FSI HxxS stump cutters require a free-flow return to the tank (leak oil).