Stump grinder attachment FSI H65 100-130 for mounting on excavators and similar machines. The recommended excavator size ranges between 12-20 t .
Use FSI H65 on slopes, streets, in parks, or in difficult to access areas to remove tree stumps, it cuts up to 8.2 cm per sweep and handles an Ø105 cm (15/ 15 cm) stump in just 15 min.
Attached to
an excavator or a similar equipment type, all operations of the H65 100-130,
such as the sideways sweep and up/down moments is controlled from the machine with
free choice of cutting direction.
The cutting
direction can easily be set at 45-degree intervals in the joint between the
unit and the fitting plate for the tool attachment.
The
hydraulically driven stump grinder is delivered with an uncoated top plate, on
which an optional tool attachment can be fitted to connect to your machine.
FSI can provide a selection of fixtures suitable for your tool carrier, if necessary.
The FSI H65 is covered by three different motor variants, see the other variants: FSI H65 135-160 and FSI H65 165-200
FSI 29 - 28 pcs
Max 8.2 cm per sweep
500 kg
12.0 - 20.0 ton
55-77 kW / 75-100 HP
100-130 l/min @ max 350 bar
