Zeigt alle 9 Ergebnisse
-
FSI H20
FSI 21 - 12 Stck
Max 2,5 cm je Schwenk
70 kg
2,0 - 3,5 ton
12-22 kW / 15-30 PS
30-50 l/min @ max 250 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil). -
FSI H20S
FSI 21 - 12 Stck
70 cm
Max 2,5 cm je Schwenk
92 kg
1,5 - 2,5 ton
12-22 kW / 15-30 PS
30-50 l/min @ max 250 bar
Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
request.
Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
FSI HxxS stump cutters require a free-flow return to the tank (leak oil). -
FSI H40
FSI 25 - 16 Stck
Max 5,2 cm je Schwenk
150 kg
3,0 - 7,0 ton
18-31 kW / 25-42 PS
50-75 l/min @ max 250 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil). -
FSI H40S 50-75
FSI 25 - 16 Stck
110 cm
Max 5,2 cm je Schwenk
200 kg
???
18-31 kW / 25-42 PS
50-75 l/min @ max 250 bar
Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
request.
Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
FSI HxxS stump cutters require a free-flow return to the tank (leak oil). -
FSI H40S 80-110
FSI 25 - 16 Stck
110 cm
Max 5,2 cm je Schwenk
250 kg
???
29-48 kW / 40-65 PS
80-110 l/min @ max 250 bar
Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
request.
Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
FSI HxxS stump cutters require a free-flow return to the tank (leak oil). -
FSI H52
FSI 25 - 20 Stck
Max 6,1 cm je Schwenk
220 kg
8,0 - 14,0 ton
29-48 kW / 40-65 PS
80-110 l/min @ max 300 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil). -
FSI H65 100-130
FSI 29 - 28 Stck
Max 8,2 cm je Schwenk
500 kg
12,0 - 20,0 ton
55-77 kW / 75-100 PS
100-130 l/min @ max 350 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil). -
FSI H65 135-160
FSI 29 - 28 Stck
Max 8,2 cm je Schwenk
500 kg
12,0 - 20,0 ton
77-92 kW / 105-125 PS
135-160 l/min @ max 350 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil) -
FSI H65 165-200
FSI 29 - 28 Stck
Max 8,2 cm je Schwenk
520 kg
12,0 - 20,0 ton
92-118 kW / 125-160 PS
165-200 l/min @ max 350 bar
Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil).