loader
Stubbenfräsen angetriebene von

Hydraulik

  /    /  Hydraulik

Showing all 9 results

  • FSI H20

    Lern mehr
    FSI 21 - 12 StckMax 2,5 cm je Schwenk70 kg
    2,0 - 3,5 ton12-22 kW / 15-30 PS30-50 l/min @ max 250 bar

    Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
    movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
    plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
    provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil).

  • FSI H20S

    Lern mehr
    FSI 21 - 12 Stck70 cmMax 2,5 cm je Schwenk92 kg
    1,5 - 2,5 ton12-22 kW / 15-30 PS30-50 l/min @ max 250 bar

    Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
    backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
    request.
    Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
    carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
    FSI HxxS stump cutters require a free-flow return to the tank (leak oil).

  • FSI H40

    Lern mehr
    FSI 25 - 16 StckMax 5,2 cm je Schwenk150 kg
    3,0 - 7,0 ton18-31 kW / 25-42 PS50-75 l/min @ max 250 bar

    Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
    movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
    plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
    provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil).

  • FSI H40S 50-75

    Lern mehr
    FSI 25 - 16 Stck110 cmMax 5,2 cm je Schwenk200 kg
    ???18-31 kW / 25-42 PS50-75 l/min @ max 250 bar

    Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
    backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
    request.
    Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
    carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
    FSI HxxS stump cutters require a free-flow return to the tank (leak oil).

  • FSI H40S 80-110

    Lern mehr
    FSI 25 - 16 Stck110 cmMax 5,2 cm je Schwenk250 kg
    ???29-48 kW / 40-65 PS80-110 l/min @ max 250 bar

    Hydraulic driven stump cutter with integrated sweep movement for fitting to loaders and tool carriers. The stump cutter is supplied with an uncoated
    backplate to which an attachment can be fitted. FSI provides a range of adaptor brackets suitable for the most common tool carriers and loaders upon
    request.
    Two hydraulic cylinders ensure a stable sweeping movement in either direction. Control of the sweeping movement can be done either from the tool
    carrier or by an electronic control box depending on the connectors available on the tool carrier or loader.
    FSI HxxS stump cutters require a free-flow return to the tank (leak oil).

  • FSI H52

    Lern mehr
    FSI 25 - 20 StckMax 6,1 cm je Schwenk220 kg
    8,0 - 14,0 ton29-48 kW / 40-65 PS80-110 l/min @ max 300 bar

    Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
    movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
    plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
    provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil).

  • FSI H65 100-130

    Lern mehr
    FSI 29 - 28 StckMax 8,2 cm je Schwenk500 kg
    12,0 - 20,0 ton55-77 kW / 75-100 PS100-130 l/min @ max 350 bar

    Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
    movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
    plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
    provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil).

  • FSI H65 135-160

    Lern mehr
    FSI 29 - 28 StckMax 8,2 cm je Schwenk500 kg
    12,0 - 20,0 ton77-92 kW / 105-125 PS135-160 l/min @ max 350 bar

    Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
    movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
    plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
    provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil)

  • FSI H65 165-200

    Lern mehr
    FSI 29 - 28 StckMax 8,2 cm je Schwenk520 kg
    12,0 - 20,0 ton92-118 kW / 125-160 PS165-200 l/min @ max 350 bar

    Hydraulically driven stump cutter for fitting to an excavator or similar machine, where the machine itself is used to execute sweep and up/down
    movement. Free choice of cutting direction. The cutting direction can easily be set at 45 degree intervals, in the joint between the unit and the fitting
    plate for the tool attachment. The stump cutters are supplied with an uncoated top plate, on which an optional tool attachment can be fitted. We also
    provide a selection of tool attachments. The stump cutters require a free-flow return to the tank (leak oil).